Mechanical Seal SeccoLip481

Type in the H-Brinker HBSLip481

Seccolip481 Operating range

Shaft diameter (on stock): d1 = 40 … 125 mm (1.57″ … 4.92″)
Special shaft diameters between 25 mm and 200 mm possible (0.98″ … 7.87″)
Pressure: p1 = vacuum … 6 bar (87 PSI)
Temperature: -30 °C … +200 °C (-22 °F … +392 °F)
Sliding velocity: vg = 0 … 2 m/s (0 … 6 ft/s)
Axial movement: ±3.0 mm
Radial movement: 1.0 mm (up to 3 mm on request)For applications beyond this range, please inquire.

Lip sealing element: bright chemically highly resistant PTFE-compound with FDA
Secondary seals: FKM (V)
Metallic parts: 316L / 1.4404
Other materials are possible, depending on customer requirements.

Available as a ready-to-mount cartridge for quick and easy installation
Tested technology ensures safe use
Dry-running lip seal – depending on the application no supply system is necessary
No additional rolling bearing required, but optionally available
Sealing element made of bright chemically highly resistant PTFE compound
ATEX certificate on request
Customized adjustments possible

d₃	d₁	nxd₂	d₄	d₀	k	d₈	d₉	L₁	l₁	l₂	d_a	M₁	M₂	S
40	175	4×18	110	90	145	80	175	91.5	19.5	26	145	M8	M16	G1/4
50	240	8×18	176	135	210	90	168	91.5	19.5	28	153	M8	M16	G1/4
60	240	8×18	176	135	210	100	178	91.5	18	27.5	155	M8	M16	G1/4
80	275	8×22	204	155	240	130	198	100.5	21	33.5	175	M8	M20	G1/4
100	305	8×22	234	190	270	150	218	102.5	23	33.5	195	M8	M20	G1/4
125	330	8×22	260	215	295	179	243	107.5	23	38.5	220	M8	M20	G1/4

Seccolip481-2

d₃	d₇	d₁	nxd₂	d₄	d₀	k	d₈	d₉	L₂	L_w	l₁	l₂	d_a	M₁	M₂	A, D, S
40	38	175	4×18	110	90	145	80	175	198.5	143	19.5	27.5	145	M8	M16	G1/4
50	48	240	8×18	176	135	210	90	168	205.5	148	19.5	29	155	M8	M16	G1/4
60	58	240	8×18	176	135	210	100	178	205.5	158	18	29	155	M8	M16	G1/4
80	78	275	8×22	204	155	240	130	198	216.5	168	21	35	184	M8	M20	G1/4
100	98	305	8×22	234	190	270	150	218	232.5	178	23	37	195	M8	M20	G1/4
125	120	330	8×22	260	215	295	179	243	245.5	203	23	47	222	M8	M20	G1/4

Seccolip481