Mechanical Seal H10-H8

Type in the H-Brinker HB10-hb8

H10-H8 Operating range

Seal face: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B)

Insensitive to solids in the medium
Very short axial installation length (analog lip seals) combined with high pressure capability
No damage of the shaft by dynamically loaded O-Ring
Due to the stationary design insensitive to shaft misalignements
Compact ready-to-install unit

d₁	d₂	d₂’	d₃	d₄	d₅	d₆	l	l₁	l₁’
15	16	17	42	22.6	21	34	17	15.0	16
18	19	–	45	25.6	24	37	17	15.0	–
20	21	22	48	27.6	26	40	17	15.0	16
22	23	24	50	29.6	28	42	17	15.0	16
25	26	27	52	32.8	31	44	17	15.0	16
28	29	–	55	35.8	34	47	17	15.0	–
30	31	32	58	37.8	36	50	17	15.0	16
32	33	34	60	39.8	38	52	17	15.0	16
35	36	37	62	42.8	41	54	17	15.0	16
38	39	40	65	45.9	44	57	17	15.0	16
40	41	42	68	47.9	46	60	17	15.0	16
42	43	44	72	49.9	48	64	17	15.0	16
45	46	47	75	52.9	51	67	17	15.0	16
48	49	–	80	55.9	54	72	17	15.0	–
50	51	52	80	58.2	56	72	17	15.0	16
52	53	–	82	60.2	58	74	17	15.0	–
55	56	57	85	63.2	61	77	17	15.0	16
58	59	–	90	66.7	64	82	17	15.0	–
60	61	62	90	68.7	66	82	17	15.0	16
65	66	67	95	73.7	71	87	19	16.5	18
68	69	70	100	76.7	74	92	19	16.5	18
70	71	72	100	78.7	76	92	19	16.5	18
75	76	77	108	83.7	81	100	19	16.5	18
80	81	82	112	88.7	86	104	19	16.5	18
85	86	87	118	93.7	91	110	19	16.5	18
90	91	92	122	99.5	96	114	19	16.5	18
95	96	97	128	104.5	101	120	19	16.5	18
100	101	102	132	109.5	106	124	19	16.5	18