Seal Cartex ANSI Single Seal Features
- Single seal
- Available for standard (Cartex-ASPN) and big bore (Cartex-ABPN) seal chambers
- Cartridge
- Balanced
- Independent of direction of rotation
- Single seals with flush (-ASPN, -ABPN) and with quench combined with lip seal (-ASQN, -ABQN) or throttle ring (-ASTN, -ABTN)
Seal HBCartex ANSI Single Seal Material
- Seal face: Silicon carbide (Q1), Carbon graphite resin impregnated (B), Tungsten carbide (U2)
- Seat: Silicon carbide (Q1)
- Secondary seals: FKM (V), EPDM (E), FFKM (K), Perflourocarbon rubber/PTFE (U1)
- Springs: Hastelloy® C-4 (M)
- Metal parts: CrNiMo steel (G)
Seal Cartex ANSI Single Seal Advantages
- Ideal for use in ANSI process pumps
- Universal applicable for packings conversions, retrofits or original equipment
- Seal for standardizations
- No dimensional modification of the seal chamber necessary, small radial installation height
- No damage of the shaft by dynamically loaded O-Ring
- Extended service life
- Installation faults are avoided, cost-effective
- No damage caused by dirt entered during assembly
- Straightforward and easy installation due to pre-assembled unit (reduced down-times)
Seal HBCartex ANSI Single Seal Recommended applications
Process industry
Petrochemical industry
Chemical industry
Pharmaceutical industry
Power plant technology
Pulp and paper industry
Water and waste water technology
Mining industry
Food and beverage industry
Universally applicable
ANSI process pumps
Dimension Table
d1 | d2 | d3 min | d3 max | l1 | l2 | l3 | l4 | l15 | l16 | l17 | a1 | da | s | Connection |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1.000 | 1.693 | 1.732 | 2.205 | 2.638 | 1.669 | 0.969 | 1.000 | 2.937 | 1.909 | 1.028 | 2.756 | 3.937 | 0.433 | 1/4 NPT |
1.125 | 1.713 | 1.752 | 2.205 | 2.638 | 1.669 | 0.969 | 1.000 | 2.937 | 1.909 | 1.028 | 2.440 | 4.134 | 0.437 | 1/4 NPT |
1.250 | 1.969 | 2.008 | 2.402 | 2.638 | 1.669 | 0.969 | 1.000 | 3.130 | 2.102 | 1.028 | 2.638 | 4.252 | 0.433 | 1/4 NPT |
1.375 | 1.961 | 2.000 | 2.402 | 2.638 | 1.669 | 0.969 | 1.000 | 2.947 | 1.919 | 1.028 | 2.760 | 4.213 | 0.437 | 1/4 NPT |
1.500 | 2.200 | 2.244 | 2.717 | 2.638 | 1.669 | 0.969 | 1.000 | 3.130 | 2.102 | 1.028 | 2.950 | 4.488 | 0.551 | 3/8 NPT |
1.625 | 2.340 | 2.421 | 2.795 | 2.638 | 1.669 | 0.969 | 1.000 | 3.130 | 21.02 | 1.028 | 3.030 | 4.921 | 0.551 | 3/8 NPT |
1.750 | 2.461 | 2.500 | 2.953 | 2.638 | 1.669 | 0.969 | 1.000 | 3.012 | 1.984 | 1.028 | 3.228 | 5.118 | 0.559 | 3/8 NPT |
1.875 | 2.583 | 2.661 | 3.070 | 2.638 | 1.669 | 0.969 | 1.000 | 3.071 | 2.043 | 1.028 | 3.190 | 5.118 | 0.551 | 3/8 NPT |
2.000 | 2.677 | 2.756 | 3.189 | 2.638 | 1.669 | 0.969 | 1.000 | 3.130 | 2.102 | 1.028 | 3.430 | 5.472 | 0.630 | 3/8 NPT |
2.125 | 2.834 | 2.913 | 3.583 | 2.638 | 1.669 | 0.969 | 1.000 | 3.012 | 1.984 | 1.028 | 3.820 | 5.512 | 0.650 | 3/8 NPT |
2.250 | 2.960 | 3.039 | 3.583 | 2.638 | 1.669 | 0.969 | 1.000 | 3.130 | 2.102 | 1.028 | 3.858 | 5.866 | 0.650 | 3/8 NPT |
2.375 | 3.070 | 3.125 | 3.590 | 2.638 | 1.669 | 0.969 | 1.000 | – | – | – | 4.020 | 6.181 | 0.709 | 3/8 NPT |
2.500 | 3.212 | 3.291 | 3.937 | 2.638 | 1.669 | 0.969 | 1.122 | 3.130 | 2.102 | 1.028 | 4.528 | 6.693 | 0.709 | 3/8 NPT |
2.625 | 3.338 | 3.417 | 4.016 | 2.638 | 1.669 | 0.969 | 1.250 | 3.130 | 2.102 | 1.028 | 4.528 | 6.378 | 0.630 | 3/8 NPT |
2.750 | 3.660 | 3.740 | 4.370 | 2.638 | 1.929 | 0.709 | 1.260 | 3.130 | 2.102 | 10.28 | 4.646 | 7.441 | 0.709 | 3/8 NPT |
3.000 | 3.937 | 4.016 | 4.724 | 3.307 | 2.260 | 1.047 | 1.260 | 3.858 | 2.516 | 1.343 | 5.000 | 7.835 | 0.709 | 3/8 NPT |
3.250 | 4.189 | 4.268 | 4.921 | 3.307 | 2.260 | 1.047 | 1.260 | 3.858 | 2.516 | 1.343 | 5.315 | 7.830 | 0.709 | 3/8 NPT |
3.750 | 4.689 | 4.750 | 5.433 | 3.307 | 2.260 | 1.047 | 1.000 | – | – | – | 5.827 | 8.189 | 0.866 | 3/8 NPT |